The distance between the TD-units. It is measured and entered by the operator, in millimeters or inch, depending on system setup.

The bolt pattern diameter. Measured and entered by the operator, in mm or inch depending on system setup.

The distance between the TD-M and the coupling gap. Automaticaaly set to half the A measure, but can be altered if necessary.

The live value from the TD-S unit. Comparable to dial indicator value.

The live value from the TD-M unit. Comparable to dial indicator value.

The angular error expressed in mm/100mm or mils/inch.

The paralell/offset error expressed in mm or mils.

The result list shows each bolt's position relative to the highest positioned bolt, which is set to 0 (zero).

Starts remeasuring of all positons.

Set the number of bolts, maximum 8.

Opens Application setup menu.

Saves the measurement result to the memory.

Print out the currently displayed screen on the connected printer.

Exits the program.
Click now to return to the start screen.

Connector for TD-unit and/or laser transmitter.

Battery low indicator.

Turn on the system.

Operation indicator.